Pyramid Tea Bag Tagging Machine
Technical parameters
|
Product Name |
Autoatic Tagging Machine |
|
Speed |
80-100 tag/min |
|
Material |
Nylon mesh,PET,Non woven,PLA mesh |
|
Film width |
120mm,140mm,160mm,180mm |
|
Tag size |
2*2cm(can meet requirement） |
|
Thread length |
110mm-170mm |
|
Film inner diameter |
Φ76mm |
|
Film outer diameter |
≤Φ400mm |
|
Tagging method: |
By ultrasonic |
|
Ultrasonic |
4sets |
|
Air supply required |
≥0.6Mpa |
|
Power |
220V 50HZ 3.5KW |
|
Product pass rate |
≥99% |
|
Size |
1500mm*1200mm*1800mm |
Device Configuration Table
|
Component Name |
Model |
Quantity |
Brand |
|
Motion controller |
NP1PM48R |
1 |
Fuji |
|
PLC |
SGMJV-04 |
1 |
Siemens |
|
Touch screen |
S7-100 |
1 |
Fuji |
|
Ultrasonic |
GCH-Q |
4 |
domestic |
|
Encoder |
1 |
Ernest |
|
|
Labeling cylinder |
1 |
SMC |
|
|
Pull film cylinder |
2 |
SMC |
|
|
Labeling cylinder |
1 |
SMC |
|
|
Release film cylinder |
2 |
SMC |
|
|
Solenoid valve |
6 |
SMC |
|
|
Servo motor |
400W |
3 |
Fuji |
|
Controller |
1 |
Fuji |
|
|
Film receiving motor |
1 |
Fuji |
|
|
Controller |
2 |
Moons |
|
|
Release film motor |
1 |
CHAOGANG |
|
|
Main servo motor |
750W |
2 |
Fuji |
|
Control |
1 |
Fuji |
|
|
Fiber |
2 |
Bonner USA |
|
|
Fiber Optic Amplifier |
3 |
Bonner USA |
|
|
Relay |
2 |
ABB |
Performance characteristics:
a: With ultrasonic bonding ,the size of 20*20mm label paper fixed at 120/140/160/180 four wide can be ultrasonic sealing material
b: Can accurately control the adhesion fastness and the effect,the trigger type ultrasonic stability is high,the failure rate is extremely low.
C.Multi-point light control to ensure that the mesh without spaces,such as paste failed.
D.Using Siemens PLC control,with Siemens touch screen operation,the whole parameter touch screen settings(line length,bag length,label length)
E.High-precision feeder to ensure a high degree of tight membrane balance.
F.Full high-precision servo control,accurate to 0.1mm
G.Long and short line switch
After-sales service of equipment
Damage caused by equipment quality problems can be repaired and parts replacement free of charge. If the damage caused by human operation error and force majeure is not included in the free warranty. The free warranty will automatically lapse
●if: 1.The equipment is damaged due to abnormal use without following the instructions.
●2.Damage caused by misoperation, accident, handling, heat or negligence by water, fire or liquid .
●3.Damage caused by incorrect or unauthorized commissioning, repair and modification or adjustment.
●4.Damage caused by customer disassembly. Such as screw flower
Machine repair and maintenance services
A.Ensure long-term supply of all kinds of machine accessories and consumables.The Buyer need pay for the freight fee
B.Seller will be responsible for lifelong maintenance. If there is any problem with the machine, communicate with the customer through modern communication guidance
C.If the supplier needs to go abroad for installation and commissioning training and follow-up after-sales service, the demander shall be responsible for the travel expenses of the supplier, including visa fees, round-trip international air tickets, accommodation and meals abroad and travel subsidies (100USD per person per day).
D.Free warranty for 12 months, any quality problems occurred during the warranty period, the supplier free guidance to repair or replace parts to the demander, outside the warranty period, the supplier promises to provide preferential prices for spare parts and services.
